Quote:
Originally Posted by Gonzo
I've put a 5mm x 30mm tape in the same direction as the bevel axis, so longitudinally over the seatings of the bearings, both in upper and lower half.
Way easier than taping bearing per bearing, and the tape doesn't move because it makes some 90 degree turns once everything assembled.
If the slop would be sideways, different story...
Again, still testing this...
And what type of gear-grease would be best to use on the diff ring? A sort of type instead of a brand would be nice, so I could buy some non-RC quantities of it  |
Gonzo,
did this and problem solved, thanks for the Idea, at first i did not feel the need to do this but when i saw this thread. it made me thinking.. you guys had a point. after seing and reading thru here... arrived home and did as explained. then viola!!!! problem solved. and it did not even take any $$$ to solve the problem....
thanks guys,!!!!