View Single Post
  #1  
Old 20-11-2010
losi madness losi madness is offline
Banned
 
Join Date: Jun 2010
Posts: 274
Default LOSI8TE WITH TEKIN RX8 2250KV with spares

LOSI8TE WITH TEKIN RX8 2250KV with spares
my tekin rx8 sytem 2250kv
. its like new the truggy and shell comes with loads of spares and the rx8 sytem comes with hotwires and 1packs of 4s lipos 5000mha 35c . the sytem as been set up and that it . . these pics are old pics before i put the rx8 sytem in it

LOSI 8IGHT - T BRUSHLESS CONVERSION



















Bought this second hand about 9 months ago as a project. It looked to be in good condition but on delivery it was sadly a little tired. Since then I've sent a fortune refurbshing it and could have bought a new one for what it cost me. To name a few things:
  • New Hinge Pins
  • New Hing Pin Braces
  • New Hinge Pin Brace Covers
  • New Suspension Arms Front and Rear
  • Fully rebuilt Dampers
  • New Wing
  • New Protoform Body (This wasn't professionally sprayed so on close inspection there are a few flaws but from a distance or bashing it looks fine
  • New Bearings all round
  • New Diff Oil (7-10-5 Front-Centre-Rear)
  • New Hubs / Carriers front and rear.
  • New Servo Saver / Steering Linkage
  • 1 New Diff Cup (Think the front one)
Also Included:
  • Losi Brushless Conversion kit fitted - Original Plastic ESC mount cut off so I could bolt the Beast ESC to the Chassis.
  • Several Sets of Suspension Springs
  • Original Alloy Suspension Mounts
  • Damper Rebuild Kit
  • Comes fitted with Towerpro MG995 Steering Servo.
  • Comes with traxxas trx and rx mirco 5 channel .
  • Masses of Spares - Mainly the bits I've replaced but for a quick fix if you break something there should be enough to get you running again.
  • Spur gear etc).
  • Body
  • Instructions + Box












and the roller is as new







tools and spare as well







losi8te with everything you need to get you running etc . only thing you need is a lipo charger . Its a rtr 27mhz witha mirco reciever 5 channels and traxxas handset both are
£425 no offers its cost me hell of alot of money to finish this project . it cost me the price of a new Kit and alot more as the truggy as just been refurbished. £425 PLUS POSTED . TEKIN RX8 2250KV AND HOTWIRES AS WELL COST ME HELL OF ALOT FOR A BRUSHLESS SYTEM YOU PAY FOR TOP GEAR AS ITS ABOUT THE BEST YOU CAN BUY . IF YOU NEED ANY INFO DROP ME A PM AND I WILL GET BK TO YOU CHEERS THANKS FOR LOOKING .