[sosidge]

Originally Posted by jandesousa

Hi all,

I'm very sure this has been covered on here many times but I can't find any info on this. I'll try and explain as best as I can.

I had a DF03 with Futaba 40Mhz radio gear in it. Worked 100%. No problems whatsoever, no glitching and massive range!!! I now bought a truggy, nitro converted to brushless, running the mtroniks G2 beast combo and a cheap Hextronik servo. Now all of a sudden my truggy will start to go mental at about 10 - 15m. It will just do things all by itself, turn, reverse and so on. The range on the Futaba gear should be about 400m. Anybody got any ideas???

Could it be the cheap servo or is it possibility that the metal on metal gear is causing interference? I have a steel pinion running on a steel centre spur gear.

Another question if I may, If I get 2.4Ghz radio gear, will this fix my problem??? I am thinking about getting 2.4Ghx radio gear anyway.

Thanks in advance.

P.S. Excellent website and forum.

Probably this bit is your problem.