Quote:
Originally Posted by jcb
I'd make sure your gearbox housing are screwed down square and that nothing is bent, also make sure your diff eccentric rings are set the same both sides as it's reasonably easy to get them out by one notch.
On a side note where are your racing tomorrow? as I notice your in Suffolk which isn't that far from me.
|
hi mate,
i will have a look and see if the housing is bent. i took the shims of my front diff and fitted them to the rear which has reduced the play alot.
yes i live in suffolk and i sould be racing at coastal model car club in ipswich, linky:
http://homepage.ntlworld.com/barry.h/homepage.htm
if you have the time you should check it out.
many thanks
lewis