Quote:
Originally Posted by Nige
Rudebits' thumb screws look very nice  though it looks like a screw is fixed within the thumb screw and then it screws into the chassis. Overtime with constant doing/undoing, won't this strip the thread in the chassis? Or do they work like the original thumb nuts and do up on the 3x12mm screws?  |
I know that Lee runs a 5300 LiPo and a plate underneath so there's a chance that the std grub screw isnt long enough. My suggestion would be to put a long allen bolt into the chassis then cut the end off after you have worked out what length you need to have showing to provide a good fixing.
Screwing the bolt in and out of the plastic each time is a pain and prefer the way the system works on the Associated 2WD cars...