Quote:
Originally Posted by Gonzo
So I’ve put a tape longitudinally in the bottom of the case where the bevel-bearings go, so a 5 mm wide tape from just not touching the bevel gear till sticking out at the other side. This both in the up and down half of the case. That took care of the slop for me. Let’s see how this goes.
|
Again 1 tooth damaged
It's not the top corner on 2 or 3 consecutive teeth anymore like the other times, but the complete side of one tooth
. But I was already able to drive 15 packs with it, and no noise, I only saw the damage during maintenance.
So as expected, taking care of the slop with tape helps!!
I have to admit that my slipper is set tight, I hate a loose slipper (that's why I sold my BMax, with a slipper set to my taste, a set of gears of a BMax survived exactly 4 minutes...). With a DEX a couple of hours, so I can't complain.
I guess I'll have to loosen my DEX' slipper half a turn to get rid of the problem forever.
Or is there a way to loosen the slipper only a quarter turn?