Thread: losi xx setup?
View Single Post
  #4  
Old 11-10-2010
Nick Goodall's Avatar
Nick Goodall Nick Goodall is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Sep 2006
Location: Newbury, Berkshire
Posts: 2,161
Default

Losi XX used to work everywhere with one simple setup!

Front - 35Wt Oil, 556 Pistons (Drilled out Red pistons, 2 holes same as orange), Blue Springs (Green or Silver if you needed a tad more steering)

Rear - 30Wt Oil, 556 Pistons (as above), Pink springs.

Do you know which car it is you have? If it's the CR rear end you want to run the shocks on the inner hole of the rear wishbone, middle of the tower. If it's the older rear-end (With outboard toe-in) we used to modify the wishbones by drilling a further two holes outward to the standard 3 you used to have.....

Fron was always outside hole of the front wishbone, and middle or inner of the tower (again depending if you have the 2 or 3 holes in the top).
Reply With Quote