Quote:
Originally Posted by Stretch
Just out of curiosity:
Why wouldn't you just get a straight bladed watchmaker's screwdriver, insert it between the inside of the e-clip and the shaft of the outdrive and twist it to pop the e-clip off? Takes a couple of seconds, no effort and you can usually reuse the clip as it doesn't get damaged.
HTH
|
You need to get the gear off before you can see the e clip on the plastic housing side ! i trial fitted my out drive to the gear before i put it thro the housing removing very small amount of anodising from the hex on the outdrive so it just falls out with a tap on a worktop/bench