Quote:
Originally Posted by MiCk B.
Hey,
At this stage, see image.
 Put the bearings in and the bolt. Then try to tighten down the servo saver nut.
Use the bolt as a guide for the servo saver nut.
MiCk B. :-) |
don't take this the wrong way - but I'm ok with following the manual !!
I know what you're saying is a workaround to get it to come together, but basically even if you do that it's tight, and regardless - the bearings still have to be forced over the thread.
Basically, there was
definitely something "not well" with the bolt which came in my kit. I've just picked up a new one from MB and it's fixed it. Cheers, Mr B.
I know of one other person who has also experienced this.