Quote:
Originally Posted by PaulUpton
the hubs i have got only have 2 mounting holes for camber link yet the photo shows 3, are they different hubs in photo or wrong part number?
|
There are 3 options: BK2 hubs (2 holes), MF2 hubs (same as BK2 but with an extra hole) and CR hubs. I always use the CR hubs as they make the car a bit wider, which stabilises the car greatly. But you have to dremel the wheel spacers a bit or use the thinner B4 ones, as otherwise the car will be too wide.
A good starting point for every track is this rear end geometry:
- XXX pivot block
- BK2 wishbones
- XXX-CR hubs with dremeled of B4 wheel spacers
- Camber link position 3 on tower, B hole with 2 washers on hub