[redonesgofaster]

Originally Posted by Danny McGee

My setup for the national was.

front:
black spring, red piston, 37.5, DM front tower, basically holes in between the current ones, outside hole on that, outside hole on wishbone, 2-B camber link, long vla, thin rude bits plate under servo

rear, pink spring with paint removed, 32.5 oil, red piston, inside hole on tower, short wheel base, 3rd hole on top of camber link on the tower from the inside. Old style rear end, the old wishbones too with an extra hole drill on the inside. 1 degree rear hubs, middle hole on the hub, 5 degree antisquat.

Rude bits, under lipo plate, t plate.

Think that was about it to be honest. Oh losi hard foams all round too. give a little more steering.

hope that it will help


Danny

Hi,

Can you just confirm 5 degrees or 0.5 degrees antisquat?

Cheers,

Ian