Randy, please read my above post re what is happening, if the rs with 208 is turned on without a sensor cable connected it has no brakes, with a sensor cable connected it has full brakes.
Brakes are set at 100% on esc and transmitter, full brake lights showing on the rs.
The only way I can get brakes to work with a sensorless motor is to turn the rs on with a sensored motor plugged into the sensor port then remove it after the rs has made it's confirmation beep.
Please try this on your own rs with 208, remove the sensor cable, turn it on, do you have brakes?
When I say no brakes I mean zero brakes not just weak brakes
|