Quote:
Originally Posted by DJ's Dad
Having fried the speedo and motor the other week we're cautiously getting Daniels 410 back to race pace. Running SP 6.5 with 22 tooth pinion to give the gearing @ 9.77 (data sheet recommends 9.2 - 10) .: ok?
With a 5 minute run the motor temp is 77 deg C, is this too hot? (Maplin IR thermometer N92FX currently half price @ £20)
Currently there's only one hole in the front of the body shell over the motor, if I open the rear facing hole I'll get an airflow over the motor and drop the temp some more?
Any other thoughts welcome
Nigel.
|
that is 2hot imo opinion thats about 170 f and only 5 mins run time yikes make sure you dont have some binding going on in your cvd or diffs or something,something is not working smoothly imo....
i ran a new lrp sxx tc and a 7.5 ballistic with a 21pinion and after like 8 mins runs i was coming off around 148 to 155 or so