Quote:
Originally Posted by RS Concept
Hi Guys.
Does anybody has usable setup for very smooth but very dusty track.
Mainly we use proline bowtie tires.
Unfortunately on my X6sq I use TRF shocks with Asso springs, but Ill try to optimalize it to Losi shocks setup.
Thanks in advance.
|
Hi mic from Australia here
ive posted a low grip setup on the hi from aussie land forum
i run asso no 1 pistons in the rear of my losi shocks with white springs and losi 27.5 oil with 3* toein block and find my car has heaps of grip!!!
on the front red springs with asso no 2 piston or 56 losi and 30w oil ...
if im looking for more grip i will go to the longest link on the rear inside hole on bulkhead and outside hole on hub !! but i find it has too........much grip then! short wheelbase rear arms and hubs!!!
the set up on the forum is the setup i used at our newly built track and the grip was very low and the temp was around 12* all day!!! try asso browns front and green rear some times i would run asso black on the rear when i ran asso shocks (same oils F 30w R 30w if u r useing black springs also run the B44 rear spring retainers as the black springs are very soft and u will run out of threeds on the shock!)
Happy racing
MIC Salis
X Factory Australia Melbourne