[Adam Skelding]

Originally Posted by gramey

Has anyone tried mounting their rear wing lower or cut the wing down from kit height, mine just seems to act as a huge air brake on the straights?

Hi. I've mounted my wing a little lower than standard.
You can drill a hole between the existing 2 in the shock tower and mount the wing using only 1 screw. The bottom of the wing mounts do spread apart a little but they are held in place by the gear box. I've had no problems running the wing like this.

It does help a little over the jumps. The main thing to try for better jumping is to trim the vertical section at the rear of the wing. I cut min down to about 1/2 height in the centre and flare the cut back up to the full height at the side pods.

Hope this helps.