Quote:
Originally Posted by showtime
sounds just like your typical truck basher 
5700 is equal to a 3.5 turn motor - bollocks!
have a look at this motor kv chart from novak & you'll see that the volociti 7.5R has the same rating as your motor & we use hotter than that in our 2wd's!
http://www.teamnovak.com/products/br...spec_chart.htm
plus i actually have a Mamba max with a 7700 & i can't think of any way that a 5700 is better. apart from being slower & easier to drive  |
so a 7700 can handle 11.1 v 3s lipo or 12s nimh bolloxs can it
5700 has more torque and revs with a 3s lipo than a 7700 with an all it can take 2s / 8s mimh
also it says on motor 5700kv - 3.5t does the t stand for tit
deep breath
off - road t4 / rustler /xxx - t with a 7700kv maxed out with a tiny 2s lipo 14-19t pinion and largest spur 50+mph
off - road t4 / rustler / xxx - t with 5700kv maxed out with a bigger as it can handle it (tho gets a bit hot lol) 3s lipo 13-17t pinion and largest spur 60+mph
5700kv in my 2wd stadium truck with the right gearing and lipos kiks ass, what I like is that there is alot of adjustments I can do on the esc from a pc, the software is so easy to use and under stand, and the best thing is its great fun to play with.
This is 1 of many rc big boys toys I got as Id sooner spend my money (what little I have) on sh?t hot rc toys and upgrades than exstortional season tickes, track days and spares ect
Bashing is best done with good m8s with same set up on a bmx track ect..or if ya got a road car some b&q car park with some traffic cones or chalk ect to mark the track out