i have this in a losi 8
SPECIFICATION
- Stator Diameter: 30.0 mm (1.181 in)
- Stator Thickness: 26.0 mm (1.024 in)
- No. of Stator Arms: 12
- No. of Magnet Poles: 8
- Motor Wind: 6 Turn Delta
- Motor Wire: 24-Strand 0.25mm
- Motor Kv: 1400 RPM / Volt
- No-Load Current (Io/10V): 3.33 Amps
- Motor Resistance (Rm): 0.010 Ohms
- Max Continuous Current: 80 Amps
- Max Continuous Power : 1680 Watts
- Weight: 199 Grams (7.02 oz)
- Outside Diameter: 37.5 mm (1.476 in)
- Shaft Diameter: 4.98 mm (0.196 in)
- Body Length: 48.4 mm (1.906 in)
- Overall Shaft Length: 74.2 mm (2.921 in)
- Max Lipo Cell: 6s
- 1 x Scorpion Outrunner Brushless Motor HK30 Series 22.2V 1400Kv (HK3026-1400KV)
it is quite small, is very smooth and has very good torque but as is said earlier needs to be geared up to get good speed. i am on 22.2V, using a 15 tooth pinion on it, giving a similar top speed and acceleration as my nitro 1/8 (losi 8 w caster grenade 5 port) and really good driveability with none of the heroics of having too much power. the local track is quite small for an 1/8 so it suits it fine. when i can afford to i will probably get a proper motor, but for now and at a price of £54 it does the trick