Its called a Wasp 36-56 1800kv on a tired old 6s 2650 pack. Currently 13T with 46 spur (I think), its a Caster ZX-1, Mugan MBX5 copy so im told?
It is very fast! Ive ordered a 12T pinion and made a very large heat sink for the motor on a lathe. If that doesn't cool things down I think ill switch to 5s 3300mah, although a good 5s pack probably wont drop much voltage lower than the old 6s pack under load.
Ive also since put the servo disc break back on and programmed out the motor break, I presume this will put less stain on the motor and keep it cooler?
|