[gps3300]

Craig,

Is your setup for Associated or Losi Shock oil?

Cheers,

Ian

Originally Posted by Hulk

Just thought id post the set up me and Fabs used at the oOple invernational. This is what i will be using as my base set up for most tracks.

Front:

shocks: 40wt with 2b pistons, lime springs, middle hole on shock tower, outer hole on wishbone.

Camber link positions: outer hole on bulkhead, outer hole on hub, 4mm washer under the ball stud on the bulkhead.

Caster block: 30 degree

30g of weight on top of the servo.

Rear:

Shocks: 30wt with 2c pistons, purple springs, 2nd hole from the outer on shock tower, middle hole on wishbone.

camber link positions: outer hole on shock tower, middle hole on hub carrier, 3mm washer under ball stud on shock tower.

rear toe: 4 degree

anti - squat: 2 degree.

roll bar - none

Hope this helps

Craig Collinson