I ordered 3 full sets of hex head screws to replace every screw on the team c cars, I don't like the button heads so apart so I'm going to replace most of them with full hex heads and I also got all the counter sunk flat heads. I'm having a lot of trouble with the diff screw loosening all the time so I'm going to get some better 2.5mm lock nuts too, that's the only nut or screw I have to order to have enough to replace them all. I already got a few 2.5 hex heads to replace the annoying Phillips diff screw. Other than that the trucks going really well and fast and easy to drive. Seems to be for me on the tight track with have to be faster than the buggy.
Notme, that's good advice with the throttle vs steering
next time I'll do that
Other than that, I'm going to buy a brushless trainer plane soon and then a 60 amp sensored XErun esc and a sensored 8.5turn Speed Passion motor or maybe even a bit faster than that for the Stadium Truck, I'm also going to finish my Mid Motor Madrat sometime between now and the weekend, having the motor spin towards the rear of the car and the battery hard up against the motor so all the weight is in one spot is the correct setup right?. I need to make a alloy T-piece and a bracket to support the front of the gearbox and motor plate to Chassis and do a bit of grinding to fit the motor in the standard chassis and that's about it