Just thought id post the set up me and Fabs used at the oOple invernational. This is what i will be using as my base set up for most tracks.
Front:
shocks: 40wt with 2b pistons, lime springs, middle hole on shock tower, outer hole on wishbone.
Camber link positions: outer hole on bulkhead, outer hole on hub, 4mm washer under the ball stud on the bulkhead.
Caster block: 30 degree
30g of weight on top of the servo.
Rear:
Shocks: 30wt with 2c pistons, purple springs, 2nd hole from the outer on shock tower, middle hole on wishbone.
camber link positions: outer hole on shock tower, middle hole on hub carrier, 3mm washer under ball stud on shock tower.
rear toe: 4 degree
anti - squat: 2 degree.
roll bar - none
Hope this helps
Craig Collinson
|