Another couple of ideas for me to try. Cheers guys.
My power wires are currently soldered to the underneath of the tabs on my LRP speedo and are as far away from the receiver and servo as can possibly be. But of course, you all know how tight things are in there so nothing is ever "far away". My servo cable is currently routed near the end of the motor so I'll try shifting this to the other side too. I never thought of changing the servo itself, so I'll have a go with that. My speedo is soldered to the motor so no connectors there, and I replaced my connector ends at the lipo end with fresh ones too and always make sure they are screwed tight.
Fingers crossed one of the above will sort it out.
|