*** UPDATE ***
here is the latest information for you !
Caster Racing have released the following information regarding their all new EP 10th scale buggy, the SK-10. - Caster Racing is proud to announce the release of a new 1/10th 4WD off road buggy. They started off with a high level competition RTR chassis design foundation. The SK-10 Buggy is an EP buggy that's got all the racing features, and performance that a competition car needs. It's 100% upgradable chassis to a higher level competition part and features.
The SK-10 comes with the most advance performance design such as Mini Big Bore shocks with 3.5mm shock shaft. Slipper clutch differential in the centre, those are only available and build in the competition kits, but we have put all those racing features into SK-10 buggy which makes the buggy one of the kind in the market, and amount others. we have raised up the entry level bar. The advantage of having such a buggy, it's totally 100% race competitive with other racing kits in the market for the fair price you have paid. in other words, the C/P(Cost/Performance) rate is much higher than other kits out there in the market.
SK-10 EP off road Buggy 4WD - RTR BRUSHLESS SYSTEM HOBBYWING
Features:
1. Front CVD Driveshafts
2. Big Bore Shock System with screw adjustments.
3. Full Ball Bearing thought out the car.
4. Ball Diffs.
5. Slipper differential for Center.
6. Full adjustable turnbuckle.
7. Front & Rear Toe in adjustable system.
8. Racing Hinge Pin for front and Rear.
9. 3.5mm shock Shaft.
10. Racing Performance design.
11. Full Hex Racing quality Screw.
12. Alum Hex Wheel adaptor.
13. Alum Shock body and Cap.
14. Fully upgradable to 90% alum parts.
15. Spring Servo Safer System.
16. Low Profile Preprinted Body.
17. Low Balance CG design.
18. Fully High Quality racing Drive shaft.
19. 3kg servo is included
20. Brushless Motor.
21. Hobbywing Brushless 35A ESC
22. 27 Mzh AM radio
23. High Quality Racing 1800 NIMH battery.
SK-10 EP off road Buggy 4WD – RTR BRUSHED SYSTEM
Features:
1. Front CVD Drive
2. Big Bore Shock System with screw adjustments.
3. Full Ball Bearing thought out the car.
4. Ball Diff.
5. Slip differential for Center.
6. Full adjustable turnbuckle.
7. Front & Rear Toe in adjustable system.
8. Racing Hinge Pin for front and Rear.
9. 3.5mm shock Shaft.
10. Racing Performance design.
11. Full Hex Racing quality Screw.
12. Alum Hex Wheel adaptor.
13. Alum Shock body and Cap.
14. Fully upgradable to 90% alum parts.
15. Spring Servo Safer System.
16. Low Profile Preprinted Body.
17. Low Balance CG design.
18. Fully High Quality racing Drive shaft.
19. 3kg servo is included
20. 540-30000 RPM Motor.
21. Brushed 240A ESC
22. 27 Mzh AM radio
23. High Quality Racing 1800 NIMH battery.
More information can be found here:
http://www.casterracinguk.com
Regards
Ben