Quote:
Originally Posted by telboy
Its only me that can get away with only 3 coats on flo's then! lol
I put one light coat, force dry, then another light coat, force dry, then a heavy coat. And it always turns out bloody bright!!  back with two coats of white and bobs your uncle.
Always use a fairly wide pattern (spray from a little further away). Otherwise you will get blotchy streaks. Not sure if this is the problem you're having?
I use Createx flourecent hot pink, which is quite thin compared to faskolor, which I find too thick for my liking. |
I do exactly the same, and it works for me. The floro's are mega bright too.
Cannot fault the faskolor range at all, its the mutts nuts as far as im concerned. Easy to spray and never ever flakes or chips in my experience.
I find it generally needs a high pressure to spray with though. I usually set my regulator to 4bar to start with, then 'fine tune' from there depending on the colour (thickness of paint) and temp etc.