Hello all,
My set-up for clay as used on my home -track.
Stick pack configuration
No extra weight placed (yet)
Rear:
oil 35 wt
Spring as supplied with kit
piston 6 holes
Spacer onder bal-stud attachment removed.
Added 2 extra shims onder rear ball-studs
Camber link at maximum length
Shocks on the rear of the shock tower.
Shock mounting on arm : outside position
Shock mounting on tower : inside hole
4 degrees toe-in
-1 degree camber
short wheelbase
Added extra droop by installing longer ball-cups on the schock
Front:
oil 40 wt
Spring as supplied with kit
piston 4 holes
Short camber link
1 extra shim under ball-stud
shock mounting on arm : outside position
shock mounting on tower : middle hole
1 degree toe in
-1 degree camber
front arms swapped
Hope it helps:
Car went like this at my local track
http://www.youtube.com/watch?v=kteZfjTUl2E
Greetings
Hans