[HyperFX]

Originally Posted by Tbone

Hy Guys,
okey I will also give the bearing a try to fix my pin problem ..
here is another thing happend last race ass my car sounds like makig a Cappuchino on the straight

the machined fixed pin moved out in the kardan (photo 1)

and gone trough the plastik housing of the diff and damaged the diffoutdrive ...
eieieie think happend sometimes you cannot believe..

regards Tom

Be sure the end of the shaft around the hole is not cracked. If it is, toss it away and get a new shaft.
If the end of the shaft is not cracked, you can "crimp" the center of the pin by hammering it with the tip of a screwdriver. Just a slight crimp will suffice. Then, press the pin back into the shaft. I've never had to do this to the shafts on my 410, but I have done it to a few other cars, and the pins stayed in place.