Unlike most manufacturers Associated still make a lot of parts for the original RC10s, as long as you don't mind them being moulded in more modern materials.
The best source is Tower Hobbies as they only list their actual stock
http://www2.towerhobbies.com/cgi-bin...NUFACTURER=ASC There are shops with bigger parts lists, but these are taken from general parts lists and still include lots of discontinued stuff. Tower are having problems with getting hold of some of the stock as Associated have moved factory and still haven't got all their machines up and running again. I can't wait until they get some RC10 shells back in stock.
Suspension parts are available, MIP CVDs are still available as Associated stopped making the driveshafts. The motor mount will have to be found on ebay (not too difficult) or post a want ad on
http://www.rc10talk.com/
BTW if the steering arms are MIP ballraced ones you are better sticking with them as the pivots bolt the front nose on better than using the original screw threads, which wear out then the nose falls off. If you don't have them it is well worth fitting
http://www2.towerhobbies.com/cgi-bin...&I=LXAX30&P=SM