A couple people on here have mentioned that the stock hex hubs don't tighten well (push on the bearing) which is true, you can't tighten the wheel on the stock ones, so they are running Kyosho part LA218 (ZX-5 Drive Washer). Also if you are using the bearings from the bearing shop in the UK then when you put the clip on the front axels assemble it so that the smooth side of the clip goes to the inside otherwise it can catch on the bearing and be notchy.
Also keep an eye on what TeamC America are doing as they have some better parts almost ready that will bring the car right up to the best cars
|