[HyperFX]

Originally Posted by Jarred King

So can TD confirm if they will be sending current 410 users replacement driveshafts ?

Obviously they are a problem. I think they should send users the 2.0mm driveshafts along with the updated ballcups and transponder mount.

any other company would ?

I can't confirm I have one fully assembled DEX410 Pro Spec, and one unassembled DEX410 Pro Spec (minus main chassis/side braces),and all the option parts, and 95% of the spares needed for repairs/rebuilds. Oh, and a very cool TD t-shirt! So, it might be unfair to some, if TD sent current owners free upgrades. I don't expect TD to do that. I would, however, be amazed, and extremely public about the fantastic TD Support, should they actually supply myself, and all current owners, with the upgrade free of charge! I'd be a TD owner for life! (Already there!)

Although the original pins are smaller and seem more easily broken/worn, I have had no problems since using two set screws on each drive pin. Not one issue! I've even used a softer metal pin (so I'm told) than the TD part, and still have had no issues. I don't believe the issue is with the part or design, as much as the lack of the second set screw in the kit. Anyway, I'll be upgrading to 2mm as soon as I can afford it, just for durability sake. 'Til then, it's two screws for me! Yep, that's what I said. Ha!

Btw, Jarred, thanks for the setup info. Very helpful!