I know it is possible with Novak Brushless motors. I have used 3 different Novak motors and all of them were capable of a 100% mesh.
I think 94eg! was right about the shorter shaft on the LRP motor. Still though, I have never heard of anyone having trouble with a 70-80% mesh. A few guys at the tracks I race at don't have a full mesh with their gearing and they have been running their cars that way for over a year.
Quote:
Originally Posted by muratti
Hi guys, thanks for the advice but i am afraid if i flip the pinion and fix it with the motor not attached the mesh is less than if i put the pinion on the axle as before. So i tried to get it at the absolute maximum end of the rotor axle. I still havenīt got 100% mesh, more about 70-80% but i tried a short run and it seemed fine like this.
I wonder why nobody before had asked this question or is it standard that 100% mesh is not possible on a DB01?
Thanks dimblum, i already knew that tip with the paper  |