Quote:
Originally Posted by Welshy40
Nice idea im just using a pair of old shock shafts and cant be bothered changing to the pins. Still good idea of yours.
Bad news though as the blue hubs cant be used so would recomend buying the correct hubs as 4 degrees is more steering than you will ever need, also the width isnt correct with the teamline hubs. Ive tried and had to change. Angle isnt correct either on the wishbone.
|
Yeah i was thinking of the shockshaft too but since i didnt have one laying around but had these screws, screw it was going to be. it is not perfect since it should have been an fraction longer so the unthreaded part goes thrue the 2 bracketīs that way it really minimize the play. I have located some shockshafts and shall pick them up later they are with an friend of mine and he had plenty of them.
Teamline same there they where laying on my workbench so thats way they are on the car these are the 7.5 type and i will change them later for the 5 degree type. Still it looks good
When you say wishbone do you mean upper or lower ???? iīll guess upp yeah its close betveen the hub and the upper wishbone and i had to move the wishbone to the inner mounting hole since it was too long otherwise i think i will have to shorten the ballcup and maybe use the shorter turnbuckle. What lenght on the turnbucle do you use the manual say 20mm but if feels kind of long i have an 15mm type i think i will try it.
any sugestions ????
mvh Isobarik