I´m glad you liked it.
I´ve got a simple manual on the way.
Trick is to tilt the bottom part a bit forward when you fit it into the bulkhead. If you do, you don´t have to remove the front brace.
Then put the belt into the bottom part.
Next thing is to insert the "T-shaped" part and then attach top deck. When top deck is in place, the "T" is also secured. As you may have seen, the "T" has a very precise fit in the top deck.
Then you fit the diff/belt. This part is almost the most difficult part because the belt tensioners on the diff have to be correctly rotated. Otherwise it feels very tight.
Finally attach the cover and the upp bulkhead/shock mount.
Btw, how do you think it looks? Not to bad?
|