Well the 1.7mm pins for the HB car were too large. Worth a try for a couple of quid.
Quote:
Originally Posted by makinwaves
Try a search on fleabay for 1.6mm drill blanks. Granted you'd have to cut them to fit but a dremel should sort it nicely. About a £1 for plenty of pins.
HTH
Mark
|
Excellent Mark. Will give them a go.
Quote:
Originally Posted by pete99
Hi Piman,
I agree, this part is not easy to find. There is two ways of getting it though:
1) You can buy part 54118 (DB01 WO Assembly Universal Shaft - front). This part includes 9440664 (2 of them). The rear universal shaft includes the part as well I believe. This is a bit expensive though (about $30-$40).
2) Otherwise, you can do a special order from this website: http://www.goldstarstockists.com/menu.htm. The website is not the best, and you won't find the part on it, but send them an e-mail. They are very nice and helpful and they will get the part for you. They will get in touch with Tamiya Japan directly.
Hope that helps,
Peter |
Peter, thank you for the link will give them a go if the drill blanks are no good.
Thanks for all your help.
James