My setup from carolinas rc is on pettit rc's site. Good start. Definitly start with either proline suburb MC tires, losi pink BK-bars or taper pins, Jconcepts gold barcodes work on certain clay too. Fronts either barcodes or tapers. I made a front set of suburbs out of some rears(cut and glue).
In the rear use toe-in hub carriers, light green spring. Longest camber link in second from bottom hole. Space wheels forward.
Front mainly stock but raise inner camber hole, 1mm shim on camber hub. spacer on the inner arms behind arms, red springs 2 tower,outer arm.
Turn down dual point on transmitter so you can turn around in the tightest area on the track. The car has almost too much steering throw at max.
Tires are the biggest help. Try box stock with those mentioned above and go from there. This setting here takes the most steering out and calms the car down a lot.
|