
07-02-2010
|
 |
Spends too long on oOple ...
|
|
Join Date: Feb 2007
Location: In Early Retirment
Posts: 5,992
|
|
2008 TC Lipo List is here
Quote:
Originally Posted by _sleigh_
Following a little more research, the DL5000 is a LiPo with side exit wires. This would probably fail the BRCA rules depending on width.
|
Quote:
Technical Rule 3.. --- Lithium Based Batteries – for 2010.
Lithium Based (LiPo/LiFe) Batteries can be approved, but must conform to the following :-
1. Lithium Based (LiPo/LiFe) battery packs must have a hard, protective case that completely envelopes the
cell(s). The case should be made from ABS or a similar material. The two halves of the case must be
factory sealed in a way that any attempt to open the case will destroy the case. The only opening in the
case that is allowed, is for the exit of wires.
The maximum case sizes are as follows: -
2S Batteries.
Length: 139.0mm.
Width: 47.0mm. (The max. width includes any side exit wires).
Height: 25.1mm. (Chassis location features additional to this dimension are allowed) Saddle-Pack cells are allowed, but must comply with the above dimensions. Saddle-Pack cells must have a combined dimension of 139.0mm max when placed end to end.
|
|