This is what I ran at the BNWO - the car was fast but I didn't have much luck in 2wd
front:
Mini Pin Yellow
Green spring - 32,5wt - #56 - 1mm limiter
Middle wishbone
Outer tower
Camber link 3-B, 2 washers
10gr of lead in nose
rear:
Mini Pin Yellow
Red spring - 30wt - #56 - 0mm limiters
2 inside on tower
Inner on wishbone
Camber link 3-C, 3 washers
Wheel base medium
0° anti-squat
wing low, VLA front and rear long
Full lead piece under lipo
20g lead between lipos and motor
Lead under motor
Lead between back of motor and gearbox
-- try get the fr/rr weight split around 34/66
std CR rack no washers under ball studs
24/78 tooth on the 7.5
G