Quote:
Originally Posted by jhammond
I've always shimmed out any major slop.
It's sort of to be expected on most plastic moving parts.
Julius.
|
With the plastic kit spacers in the rear, I didn't need any shims in the back. The front took a single 0.2mm shim behind the cross pin and it seemed just about right. May have been able to go to a 0.3mm, but I didn't have any on hand (kit only includes 0.2mm).
I'm going to be installing all the metal spacers from the TRF/DB01-R kits this weekend (about $9.50 in parts). I'll post again if shimming is any different...