What exactly do you need to know? The setup should be done, as such
EPA on throttle and brakes should be at 100%
Turn on ESC
Hold the buttons down, to go into setup
Middle LED should flash (with beeping), trigger should be at neutral, you will get a warble when neutral is set.
Top LED should flash (with beeping), pull trigger to full throttle, you will get a warble, full throttle is set
Bottom LED should flash (with beeping), push brakes full on, you will get a warble, full brake is set.
If you don't get a warble on full throttle, try reversing the throttle channel on your radio, or increasing the EPA on throttle and brake to 120%, then 150%
Hope this helps a little.
|