My method:
1.Get as much off at track as possible-Ideally with a compressor if there is one to hand.
2.After quick clean GT85 It all Cover everything-Specially bearings ect.
3. Take home..I use Muc-OFF as soon as you can wipe of other junk, and use a compressor/airbrush haha to clean mud.. then wipe off with brush.
4.Re apply GT85 put it away till next time-IF I was going to use it at practice or something..
5.I only race, So I normally Relube wheel bearings ect after each day-Unless I know Im going to practice before..
Clean everything-Complete strip and clean/lube.
6.Hudy bearing grease bearings-Main focus diff and wheel bearings
7.Assemble-Check for worn/broken parts replace if necessery-Same with glow plugs and clutch shoes ect.
8.Rebuild-GT85-Leave 2 hrs wipe off excess-Smile at your work.. and have piece of mind its super clean and shouldn't have any issues next use.
|