Has anyone else tried the rear gearbox mod? I have been trying it over the last couple of weeks on wet astro, and found you don't get enough forward traction....
Quote:
Originally Posted by Mossy
Bury Metro Indoors Tq Setup
Front -
Track Washers - 1mm front and back
Roll Bar - No
Shock Position Mount - Middle
Shock Position Wishbone - Middle
Front Rake - 10 Degrees
Washers - 0mm
Front Link Bracket - 38.5mm
Washers on Hub - 0
Alloy 7.5 degree front Yokes.
Rear -
Wheel Base - Short
Toe In - 3mm Rear, .5mm front = 3.25 degrees
Anti Squat Washers - 0mm Rear, 3.5mm Front (rear hole 4mm higher on rear gearbox housing than standard)
Rear Link Bracket - 38.5mm
Washers - 3mm
Shock Position Mount - Middle
Shock Position Wishbone - Inside
Hub Postion - Middle
Roll Bar - No
Shocks
Front -
35wt on 3 Holes Drilled 55s
Schumacher Old Grey Springs
Diaphragm - Centre cut out and removed
Ride Height - Wishbones level
Rear -
30wt on 2 Holes Drilled 55s
Schumacher Old Red Springs
Diaphragm - Centre cut out and removed
Ride Height - Wishbones level
Transmission-
Rear Diff Height - Low
Front Diff Height - Low
Layshaft Pulley - Pin Through
Front Drive - One Way
Gearing - 81 x 22 on Speed Passion 5.5
Internal Ratio - 33 Tooth Pulley
Tyres
Yellow Mini Pin all round, Schumacher Tubby Green Inserts Rear, Schumacher Green Front
Si
|