A succesful first run, 3 rounds and a final without anything breaking or falling off!!.
a couple of changes, fitted the losi a2113 pivot block which gives a slightly wider track as the driveshafts were catching on full travel, bonus of this it allows the use of the xx4 rear brace.
need to mill the motor slot a little more as i couldnt get full range of pinion spur combinations.
changed the rear shock bodies as for some reason i put on xxx4 ones which are slightly longer and caused the shocks to bottom before the chassis
weight distribution seemed good no more was added as the car jumped flat, track was wet and the car had a tendency to want to swop ends on acceleration from a corner. steering is agressive and need tuning down
|