Quote:
Originally Posted by Danny McGee
Mine are on the way so what settings am i running Si?
Also, does it fit better in the CR2 remember im not running a short servo until spektrum bring one out  Chop Chop Spektrum...
Are you still using Losi motors? Or are you giving their motors a test too? |
Well settings i am running so far are
Lipo cut of 3.2v per cell
Brake amount 100%
Drag break 20%
Punch control 0%
BEC 6v
Deadband - Smallest setting
Start power - low
motor timing highest 20%
Motor type - Smart sence
I am also running a positive throttle curve at the start to give more low end power, needed to make it feel like an LRP as i have spent so many years running their products.
CR2 no issue, xx4 can be a tight, i have removed the fan case and mounted the fan on the heatsink to get it under the shell.
Yes to Losi motors you will not catch me taking those out ;- ) Not had a chance to see a Castle motor yet let alone try one as i understand there maybe some new ones in the future.
But in a nut shell, the software so far i have found to be 100% reliable, the speedo's have always worked as asked and there is loads to change if you want or you can just keep it simple also. This speedo can also handle 25v for those nutters who want to make the car nutter fast!!!
Si