Thread: DB01 questions
View Single Post
  #15  
Old 07-01-2010
super gripper's Avatar
super gripper super gripper is offline
Member
 
Join Date: Oct 2009
Location: Wiltshire
Posts: 231
Default

Quote:
Originally Posted by T4miy4 Guy View Post
I use both side wired lipo`s (Demon 5000`s) and bullet (trackpower) lipo`s

The side wired ones as you have said are a tight fit but i`ve used them on and off for 5 months and they work fine all be it not BRCA legal tho.

I also use Trackpower sticks but to get the wiring to fit i had to use Demon 4mm male connector with solder eye Corally style bullets these
http://demonpowerproducts.co.uk/prod...oducts_id=3426 Also had to nick out the battery harness (i have a deans connector so i can use both lipo packs above.

Defineately upgrade to a slipper clutch and the dampers are recommended if your gonna start racing as the buggy handles so much better with these fitted.Also the alloy steering rack is a good upgrade (ball raced) but not nessesary.

i4n`s post is really good and gives great links to trustworthy suppliers

heres some picture`s of my DB-01 for wiring reference and battery reference





Hope this helps

Andy
My wiring route is simular if not the same for cells
Attached Images
File Type: jpg durga 008.jpg (58.5 KB, 14 views)
__________________
Tamiya TRF502x & Vega 201

Titchfield Off Road Club Hants

www.huntersystems.co.uk

Last edited by super gripper; 07-01-2010 at 04:25 PM. Reason: picture
Reply With Quote