Quote:
Originally Posted by Yoldume
Recieved my DB01 today
gave her a run all went well could put a couple more teeth on the pinion but that's for another day
what i would like to know is
1. my lipo is a squeeze to fit and as the wires come out the side anything i can do to make things a little less snug ?
2. electrics are also a squeeze i currently have them where it says in the manual but theres no routing for the throttle wire to the reciever wheres the best place for it ?
other than that is a slipper clutch a worhty upgrade ? and the airation shocks ?
|
I use both side wired lipo`s (Demon 5000`s) and bullet (trackpower) lipo`s
The side wired ones as you have said are a tight fit but i`ve used them on and off for 5 months and they work fine all be it not BRCA legal tho.
I also use Trackpower sticks but to get the wiring to fit i had to use Demon 4mm male connector with solder eye Corally style bullets these
http://demonpowerproducts.co.uk/prod...oducts_id=3426 Also had to nick out the battery harness (i have a deans connector so i can use both lipo packs above.
Defineately upgrade to a slipper clutch and the dampers are recommended if your gonna start racing as the buggy handles so much better with these fitted.Also the alloy steering rack is a good upgrade (ball raced) but not nessesary.
i4n`s post is really good and gives great links to trustworthy suppliers
heres some picture`s of my DB-01 for wiring reference and battery reference
Hope this helps
Andy