Quote:
Originally Posted by rob m
bad news pulled the front of my lazer apart and found that i have more then a problem with the kingpins,the front gear casing is broke were shock tower mounts on to it and even worse the chassis is snapped were the front bulkhead screws in. i was starting to like the lazer oh well back into the loft i think  |
Well, if you really like your lazer, you can still get new parts quite easily
.
The front gear casing (LA-32) is a weak point of the lazer, but a friend of Welshy40 is making some more strong mould that solve this problem.
It's one of the most hard part to find ... however LA32 can be buyed from this guy (
http://www.tamiyaclub.com/trades_model.asp?cid=86032), drop a mail to Cyril (
[email protected] remove NOSPAM from this address )
The original MK3 (same as MK2) chassis and top deck can be buyed on ebay:
-
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=290383205025
-
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=290381602145
Or you can get some carbon stuff from
http://www.fibre-lyte.co.uk/ .
But before buying please double check that you car is really an MK3 otherwise you will need to change some other parts.
bye
Ema
P.S. Probably I will sell some Lazer stuff in the future, but first I have to complete my Lazer Zx-r MK1 restoration
(you can see some picture soon into the vintage section)