Thread: 1.3mm and 1.4mm drill bits for your pistons
View Single Post
  #1  
Old 29-12-2009
Hulk Hulk is offline
Senior Member
  
Join Date: Jun 2006
Posts: 641
Default 1.3mm and 1.4mm drill bits for your pistons
Hi,

many of you may have seen from some of the set up sheets on the TD website that the front and rear pistons are drilled.

I drill the front 2 hole pistons to 1.2mm and the rear 3 hole pistons to 1.4mm.

Loads of people ask where they can buy the drill bits from to do this so here you go:

http://cgi.ebay.co.uk/PACK-OF-10-HSS...item2300b7cfa7

http://cgi.ebay.co.uk/PACK-OF-10-HSS...item29fd37847b



Craig Collinson
Reply With Quote