Quote:
Originally Posted by grimidol
Hi guys
Im new to the BJ4 and was hoping if u could tell me what parts i need to fit lipo batterys to my BJ4 WE as it is set up with plastic straps atthe minute thanks .
|
A quick way would be to remove the plastic cell tray, reinstall the posts and flip the battery strap over so the flat side is against the lipo (I assume the straps you have are B44 ones?). If you tighten them down enough they won't go anywhere, put some velcro/servo tape between the strap and the lipo for extra security.
The best way would be to get some lipo trays, either the Diggity Design's ones -
http://www.diggitydesigns.com/D3_B44_SaddleBraces.html
Or the AE one for the B44 -
http://67.199.85.166/main/productdet...ory=4004.b44xx
You can use the standard posts with any BRCA spec lipo, if you run taller ones like the Trakpower 4800 you will need longer posts like the ones you get with the Diggity Designs trays
