View Single Post
  #3  
Old 13-12-2009
tymill's Avatar
tymill tymill is offline
Senior Member
 
Join Date: Mar 2008
Location: London
Posts: 412
Default

Quote:
Originally Posted by Ant View Post
Are there any tyres on the market which fit the original RC10 wheels?

If not, what do wheels/tyre combination is usually fitted for vintage racing?

Thanks
If you _really_ want to run the original rc10 rear rims, you can still sometimes find Tamiya Holiday Buggy/Sand Rover tyres online. I gather that these were quite popular as a trick setup back in the day...

Problem is that the old HB rears are often almost as expensive as rc10 rears.

You could probably also stretch the easily-available frog/hornet tyres onto the rims if you really needed to.

As recommended, just get some b3-compatible 2.2 rims and open up the area where the pin fits in the wheel a bit with a hobby knife and/or body reamer to clear your 1/4 inch axles.. and you're good to go.

This is slightly "bodge-ey", but it will work fine. The "right" way to do it involves changing out your axles and bearings.

Cheers,
Ty
Reply With Quote