Quote:
Originally Posted by MRD
Wow, thats a high gearing. I use a 96t Spur, a 17t pinion and a 6.5 x12 with 40c lipo and it doesn't get beaten down the straight. Do you have any probs with over heating? My motor comes off at about 60 deg c and uses about 2000ma per 5 min run, and thats giving it some hammer  . |
Sorry it's a 19t pinion(overall ratio of 1:9.43, 21t pinion on my x6
), should have checked first, no problems overheating and I don't think I'am mega smooth, I use about 1700-1800ma out of ib4200 30c+ lipo's at bury indoor and as I know you go there I'am 9th overall at the minute with my 511, so yes I do know my way round a tamiya( I only wrote the last part as you don't know who is giving you good or bad advise by just your user name unless you know them
)