Quote:
Originally Posted by sparrow.2
I know how to wire a FET servo. It doesn't sound like he's running a FET servo though and wanting to separate the red wire off of the servo wiring to hook up to the blue fet wire coming out of the speedo. This would be bad as he would be running a 6V servo off of full battery voltage ie. 8.4V with lipo or higher with NiMH.
Try the capacitor first as it will smooth out the power delivery to the servo and help the crappy BEC circuitry.
(separating the positive wire off a servo and running it off another source is "interesting"  ) |
like i said still not intresting wiring it was nicknamed here in the uk as hotwiring standard servos you pay 8 10 pounds for a servo and take the red lead direct to the fet lead it makes them quicker yes it gives more voltage and yes it will burn the servo out however i had a futaba standard servo back in the early 90s last nearly a year doing this that was a pretty good for £10 as a ko fet back then was £75.
i wouldn't recomend it but it is nothing new
and a cap will still not do any think.